Gedee Weiler UNITURN 300 HD CNC Turning Machine
₹3.00 Lakh
This is a Gedee Weiler UNITURN 300 HD CNC Turning Machine
Heavy duty and rigid suitable for medium size (Ø 200mm) and variety of components.
Accommodate maximum part length of 300 mm.
Specially designed circular headstock without thermal distortion and expansion fitted with precision angular contact ball bearings and roller bearings enable take up high axial and radial loads.
Equipped with heavy duty L.M.Roller guide with wide span between.
Legendary spindle precision of Gedee Weiler (< 0.003 mm) delivers unmatched precision on components.
| Swing over bed | Ø 475mm |
| Swing over cross slide | Ø 225mm |
| Maximum Turning & Length(without chuck) | Ø 225 x 300mm |
| Chuck Size | Ø 165mm / Ø 200mm |
| Spindle Speed | 50 – 4000rpm |
| Spindle Nose (Bar capacity) | A2-5LB (42mm) / A2-6 (51mm) |
| Motor Power / Controller | V2-5.5 KW Siemens /Fanuc/MitsubishiV3-7 Kw Siemens, 7.5 Kw Fanuc/Mitsubishi |
| Rapid Traverse X / Z axis | 20mts./min / 25mts./min |
| No of tool Positions | 8 STN (12 available as option) |
| Tool Size | 20x20mm / 25mmx25mm (16 x 16mm ) |
| Boring Bar Size | Ø 32mm / Ø 40mm (Ø 25mm) |
| Tailstock Quill dia / Stroke / Taper | 55mm / 110mm / MT 4 |
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
This is a Gedee Weiler UNITURN 300 HD CNC Turning Machine
Heavy duty and rigid suitable for medium size (Ø 200mm) and variety of components.
Accommodate maximum part length of 300 mm.
Specially designed circular headstock without thermal distortion and expansion fitted with precision angular contact ball bearings and roller bearings enable take up high axial and radial loads.
Equipped with heavy duty L.M.Roller guide with wide span between.
Legendary spindle precision of Gedee Weiler (< 0.003 mm) delivers unmatched precision on components.
| Swing over bed | Ø 475mm |
| Swing over cross slide | Ø 225mm |
| Maximum Turning & Length(without chuck) | Ø 225 x 300mm |
| Chuck Size | Ø 165mm / Ø 200mm |
| Spindle Speed | 50 – 4000rpm |
| Spindle Nose (Bar capacity) | A2-5LB (42mm) / A2-6 (51mm) |
| Motor Power / Controller | V2-5.5 KW Siemens /Fanuc/MitsubishiV3-7 Kw Siemens, 7.5 Kw Fanuc/Mitsubishi |
| Rapid Traverse X / Z axis | 20mts./min / 25mts./min |
| No of tool Positions | 8 STN (12 available as option) |
| Tool Size | 20x20mm / 25mmx25mm (16 x 16mm ) |
| Boring Bar Size | Ø 32mm / Ø 40mm (Ø 25mm) |
| Tailstock Quill dia / Stroke / Taper | 55mm / 110mm / MT 4 |
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
