This is a Ace Micromatic Jobber Junior CNC Lathe Machine
Product Specification
| Brand | Ace Micromatic |
| Maximum Turning Diameter | 320 mm |
| Maximum Turning Length | 300 mm |
| Spindle Size | A2-5 |
| Spindle Motor Power Fanuc Continuous | 5.5 |
| Spindle Motor Power Fanuc 30 Min | NA |
| Spindle Motor Power Fanuc 15 Min | 7.5 |
| Swing Over Bed | 450 mm |
| Swing Over Carriage | 225 mm |
| Distance Between Centers | 296 mm |
| Max Bar Capacity | 25 mm |
| Bore Through Spindle | 52.5 mm |
| Max Spindle Speed | 4000 Rpm |
| Spindle Motor Power Siemens Continuous | 7 Kw |
| Spindle Motor Power Siemens S6-40 | 8.4 Kw |
| Full Power Range -Fanuc | 1333-3000 Rpm |
| Full Power Range -Siemens | 1000-3420 Rpm |
| Standard Chuck Size | 165 mm |
| X-Axis Stroke | 165 mm |
| X-Axis Rapid | 30 m/min |
| X-Axis Guideways | LM guide ways |
| Z-Axis Stroke | 310 mm |
| Z-Axis Rapid | 30 m/min |
| Z-Axis Guideways | LM guide ways |
| Turret Type | BTP-80 |
| No Of Stations | 8 |
| Max Boring Bar Dia | 40 mm |
| Od Turning Tool Size | 25 mm x 25 mm |
| Tailstock Base Travel | 135 mm |
| Tailstock Quill Dia | 80 mm |
| Tailstock Quill Taper | MT-4 |
| Coolant Tank Capacity | 110 Ltrs |
| Hydraulic Pump Capacity | 14 lpm |
| Hydraulic Power Pack Tank Capacity | 45 litre |
| Overall Dimensions Lxwxh | 2110 mm(L) X 1750 mm(W) X 1740 mm(H) |
| Overall Weight | 3000 Kg |
Product Description
Your investment is never compromised with these outstanding features.
Features:
- Powerful AC spindle motor
- Thermally stabilised spindle
- Linear motion guide ways
- Pre-tension ball screw support
- 100% ball bar tested
- Seperate coolant tank-easy maintenance
Standard Accessories:
- AC spindle and axes drives
- Precision linear motion guides on both axes
- Heavy duty bi-directional turret
- Tailstock with live center
- Automatic centralized oil lubrication
- Hydraulic power operated chuck
- AC unit for electricals
- Programmable quill
- 3 tier lamp
- Rigid tapping
- Drain line oil cooler
- Basic hydraulic system
- OD tool holder clamping block (8 Nos)
- Boring bar holder (4 Nos)
- Facing tool holder (2 Nos)
- Set of sleeves
Optional Accessories:
- Chip conveyor rear
- TPM- Trak productivity monitoring system
- Laser caliberated axes
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
