BFW BMV 50 Vertical Machining Center
₹13.00 Lakh
This is a Vertical Machining Center
| Brand | BFW |
| Spindle Speed | 8000 rpm |
| Table Size | 1000 x 510 mm |
| Feed Rate | 1 – 10000 mm / min |
| Machine Height | 2800 mm |
| Rapid Traverse X Y Z | 40 m / min |
| Pull Stud | MAS 403-P40T-I |
| Repeatability | 0.010 mm (ISO 230-2) |
| Floor Space | 2230 x 2200 mm (L x B) |
| Positioning | 0.012 mm (ISO 230-2) |
| Basic Machine Weight | 4500 kg |
| Total Connected Load | 25 kVA |
| T – Slot No. | 5 |
| Spindle Power | BMV50 |
| Spindle Taper | BT-40 |
| T Slot Size | 18 mm |
| T Slot Pitch | 100 |
| Max. Load On Table Std. | 600 kg |
Product Description
BFW vertical machining center BMV50 was designed to serve the requirements of multiple industrial markets. i.e Die&Mould, Automotive sector etc.
BMV 50 engineering Philosophy is based on three pillars Rigidity, Modularity & Productivity. It’s Smooth machining control helps to reduce cycle times.
Unique Features:
- Fixed Column Technology
- Modualar design
- CAE based optimal structural design for thermal stability
- Designed to suit adaptability of different kinds of coolant and chip handling systems
- High quality spindle on precision bearings eliminates vibration under heavier cuts
Standard Features:
- Ac servo drives
- AC variable speed spindle motor
- Hardened and ground ball screws
- Feedback through absolute encoder
- Automatic tool clamping – unclamping
- Centralised automatic lubrication
- Spindle taper air blow
- Telescopic covers with wipers
- Full machine guard
- Manual pulse generator
- RS232 serial / USB interface
- Levelling pads
- Maintenance tool kit
- Coolant gun
- Air gun
- 3 Tier lamp
- Ring coolant around spindle
- Rigid tapping
- Front chip disposal
- Electronic counter balance
Optional Features:
- Higher spindle rpm with chiller unit
- Higher spindle power
- 30 Tools automatic tool changer
- AC for electrical cabinet
- Air nozzle
- Automatic front door
- Edge finder
- Rear chip disposal
- Chip conveyor in lieu of coolant tank with chip tray
- 2 /3 axis with linear glass scale feedback
- Ball screw type automatic pallet changer with twin pallets
- 16 / 25 / 40 bar coolant through spindle
- Provision for 4th and 5th axis rotary table
- 4th axis rotary table
- Voltage stabilizer
- Ultra isolation transformer
- Increased day light area through coloumn raiser block
- Spindle mounted probe
- Table mounted probe
- Hard part probing
An Automatic Vertical Machining Center (VMC) is a type of machining center that combines automated features with vertical spindle orientation. It is designed to perform a range of machining operations with minimal manual intervention, allowing for increased productivity and efficiency in manufacturing processes.
Here are some key features and capabilities of an Automatic Vertical Machining Center:
- Automated Tool Changer: An Automatic VMC is equipped with an automatic tool changer (ATC) that allows for the automatic exchange of cutting tools during the machining process. The ATC typically holds a variety of tools in a tool magazine, and the machine’s control system manages tool changes based on the programmed instructions.
- CNC Control System: Automatic VMCs are controlled by computer numerical control (CNC) systems. The CNC system interprets machining programs, which are typically generated using computer-aided manufacturing (CAM) software, and controls the machine’s movements, spindle speed, tool changes, and other parameters. CNC control enables precise and automated execution of complex machining operations.
- Axis Movement: Automatic VMCs feature multiple axes of movement, typically including X, Y, and Z axes. These axes allow for precise positioning and movement of the workpiece and cutting tools. The machine’s control system coordinates the movements of the axes to execute machining operations accurately.
- Vertical Spindle Orientation: VMCs have a vertically oriented spindle, positioned perpendicular to the worktable. The spindle rotates at high speeds to drive the cutting tools during machining operations. The vertical spindle orientation offers advantages such as good chip evacuation and accessibility to workpieces from different angles.
- Worktable and Fixturing: Automatic VMCs have a worktable that holds the workpiece securely during machining. The worktable can move along the various axes to position the workpiece accurately. Fixturing options such as vises, clamps, and fixtures are used to hold the workpiece in place during machining operations.
- Precision and Accuracy: Automatic VMCs are known for their ability to achieve high levels of precision and accuracy. The combination of rigid machine construction, precise control systems, and accurate positioning allows for the production of parts with tight tolerances and excellent surface finishes.
- Applications: Automatic VMCs find application in various industries, including automotive, aerospace, medical, and general manufacturing. They are capable of performing a range of operations such as milling, drilling, tapping, contouring, and pocketing on different materials, including metals, plastics, and composites
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
This is a Vertical Machining Center
| Brand | BFW |
| Spindle Speed | 8000 rpm |
| Table Size | 1000 x 510 mm |
| Feed Rate | 1 – 10000 mm / min |
| Machine Height | 2800 mm |
| Rapid Traverse X Y Z | 40 m / min |
| Pull Stud | MAS 403-P40T-I |
| Repeatability | 0.010 mm (ISO 230-2) |
| Floor Space | 2230 x 2200 mm (L x B) |
| Positioning | 0.012 mm (ISO 230-2) |
| Basic Machine Weight | 4500 kg |
| Total Connected Load | 25 kVA |
| T – Slot No. | 5 |
| Spindle Power | BMV50 |
| Spindle Taper | BT-40 |
| T Slot Size | 18 mm |
| T Slot Pitch | 100 |
| Max. Load On Table Std. | 600 kg |
Product Description
BFW vertical machining center BMV50 was designed to serve the requirements of multiple industrial markets. i.e Die&Mould, Automotive sector etc.
BMV 50 engineering Philosophy is based on three pillars Rigidity, Modularity & Productivity. It’s Smooth machining control helps to reduce cycle times.
Unique Features:
- Fixed Column Technology
- Modualar design
- CAE based optimal structural design for thermal stability
- Designed to suit adaptability of different kinds of coolant and chip handling systems
- High quality spindle on precision bearings eliminates vibration under heavier cuts
Standard Features:
- Ac servo drives
- AC variable speed spindle motor
- Hardened and ground ball screws
- Feedback through absolute encoder
- Automatic tool clamping – unclamping
- Centralised automatic lubrication
- Spindle taper air blow
- Telescopic covers with wipers
- Full machine guard
- Manual pulse generator
- RS232 serial / USB interface
- Levelling pads
- Maintenance tool kit
- Coolant gun
- Air gun
- 3 Tier lamp
- Ring coolant around spindle
- Rigid tapping
- Front chip disposal
- Electronic counter balance
Optional Features:
- Higher spindle rpm with chiller unit
- Higher spindle power
- 30 Tools automatic tool changer
- AC for electrical cabinet
- Air nozzle
- Automatic front door
- Edge finder
- Rear chip disposal
- Chip conveyor in lieu of coolant tank with chip tray
- 2 /3 axis with linear glass scale feedback
- Ball screw type automatic pallet changer with twin pallets
- 16 / 25 / 40 bar coolant through spindle
- Provision for 4th and 5th axis rotary table
- 4th axis rotary table
- Voltage stabilizer
- Ultra isolation transformer
- Increased day light area through coloumn raiser block
- Spindle mounted probe
- Table mounted probe
- Hard part probing
An Automatic Vertical Machining Center (VMC) is a type of machining center that combines automated features with vertical spindle orientation. It is designed to perform a range of machining operations with minimal manual intervention, allowing for increased productivity and efficiency in manufacturing processes.
Here are some key features and capabilities of an Automatic Vertical Machining Center:
- Automated Tool Changer: An Automatic VMC is equipped with an automatic tool changer (ATC) that allows for the automatic exchange of cutting tools during the machining process. The ATC typically holds a variety of tools in a tool magazine, and the machine’s control system manages tool changes based on the programmed instructions.
- CNC Control System: Automatic VMCs are controlled by computer numerical control (CNC) systems. The CNC system interprets machining programs, which are typically generated using computer-aided manufacturing (CAM) software, and controls the machine’s movements, spindle speed, tool changes, and other parameters. CNC control enables precise and automated execution of complex machining operations.
- Axis Movement: Automatic VMCs feature multiple axes of movement, typically including X, Y, and Z axes. These axes allow for precise positioning and movement of the workpiece and cutting tools. The machine’s control system coordinates the movements of the axes to execute machining operations accurately.
- Vertical Spindle Orientation: VMCs have a vertically oriented spindle, positioned perpendicular to the worktable. The spindle rotates at high speeds to drive the cutting tools during machining operations. The vertical spindle orientation offers advantages such as good chip evacuation and accessibility to workpieces from different angles.
- Worktable and Fixturing: Automatic VMCs have a worktable that holds the workpiece securely during machining. The worktable can move along the various axes to position the workpiece accurately. Fixturing options such as vises, clamps, and fixtures are used to hold the workpiece in place during machining operations.
- Precision and Accuracy: Automatic VMCs are known for their ability to achieve high levels of precision and accuracy. The combination of rigid machine construction, precise control systems, and accurate positioning allows for the production of parts with tight tolerances and excellent surface finishes.
- Applications: Automatic VMCs find application in various industries, including automotive, aerospace, medical, and general manufacturing. They are capable of performing a range of operations such as milling, drilling, tapping, contouring, and pocketing on different materials, including metals, plastics, and composites
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
