Guangdaly 1325 CNC Router
₹2.00 Lakh
This is a Guangdaly 1325 CNC Router
Specification:
| Woking area | 1300*2500mm |
| Table style | Vacuum table with 7.5KW vacuum pump |
| Table surface | Thickened strong steel gantry with steel square tubes frame 8mm thickness,With 6 legs and the level base |
| Spindle | HQD 9.0kw ATC air cooling spindle |
| Tools magazine | Linear type follow automatic tool changer magazine with 12 tools |
| Guide rail | Taiwan Hiwin linear square guide rail |
| Driving method | X axis structure: Helical Rack and pinion drive,Taiwan Hiwin rail linear bearing 25mm(HGR25)
Y axis structure: Helical Rack and pinion drive,Taiwan Hiwin rail linear bearing 25mm(HGR25) Z axis structure: Taiwan TBL ballscrew 25mm, Hiwin linear rail 25mm(HGR25) |
| Motors and drivers | Leadshine 1300W servo driver and servo motor |
| Control system | Taiwan Syntec Control System |
| Invert | 11KW Fuling invert |
| Max.working speed | 25m/min |
| Instruction formate | G code*.u00*.mmg*.plt |
| Woking voltage | AC380V, 3phase,50/60Hz |
| Standard software | Artcam 2010 |
| Compatible software | Type3 |
| Control Cabinet | Independent |
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
This is a Guangdaly 1325 CNC Router
Specification:
| Woking area | 1300*2500mm |
| Table style | Vacuum table with 7.5KW vacuum pump |
| Table surface | Thickened strong steel gantry with steel square tubes frame 8mm thickness,With 6 legs and the level base |
| Spindle | HQD 9.0kw ATC air cooling spindle |
| Tools magazine | Linear type follow automatic tool changer magazine with 12 tools |
| Guide rail | Taiwan Hiwin linear square guide rail |
| Driving method | X axis structure: Helical Rack and pinion drive,Taiwan Hiwin rail linear bearing 25mm(HGR25)
Y axis structure: Helical Rack and pinion drive,Taiwan Hiwin rail linear bearing 25mm(HGR25) Z axis structure: Taiwan TBL ballscrew 25mm, Hiwin linear rail 25mm(HGR25) |
| Motors and drivers | Leadshine 1300W servo driver and servo motor |
| Control system | Taiwan Syntec Control System |
| Invert | 11KW Fuling invert |
| Max.working speed | 25m/min |
| Instruction formate | G code*.u00*.mmg*.plt |
| Woking voltage | AC380V, 3phase,50/60Hz |
| Standard software | Artcam 2010 |
| Compatible software | Type3 |
| Control Cabinet | Independent |
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
