Pro-Arc CNC Plasma 3D Bevel Cutting Machine
₹30 Lakh
This is a Pro-Arc CNC Plasma 3D Bevel Cutting Machine
| Brand | Pro-Arc |
| Process | Gas Cutting,Plasma Cutting |
| Diameter Range | 50 mm to 2000 mm |
| Effective Cutting Length | Up to 24 m |
| Pipe Clamping | Manual,Pneumatic,Hydraulic |
| Idler Support | At equal intervals depending on length of pipes |
Automation Grade : Fully-automatic
Power : 10 KW
Voltage : 415 V
Material : Mild Steel
Machine Capacity : 0.5 – 25 mm
Phase : 3 Phase
Frequency : 50 Hz
Table Size : 3200 x 1800 mm
Cutting Thickness : 20 mm
Power Source : Electric
The Pro-Arc CNC Plasma 3D Bevel Cutting Machine is a specialized computer numerical control (CNC) machine designed for precise and efficient cutting of various materials, particularly metals, using a plasma cutting process. This machine is specifically equipped with 3D bevel cutting capabilities, allowing it to create beveled edges and angled cuts on the workpiece.
Here are some key features and considerations regarding the Pro-Arc CNC Plasma 3D Bevel Cutting Machine:
- CNC Control System: The machine is controlled by a CNC system, which uses computer programming and software to guide the cutting process. This enables precise control over the cutting parameters, such as speed, acceleration, and direction, resulting in accurate and repeatable cuts.
- Plasma Cutting Technology: The machine utilizes plasma cutting, which involves the use of a high-temperature plasma arc to melt and cut through
Features:
- Automatic bevel cutting of weld ready parts with K, Y, V bevel cuts
- Easy programming of bevel cutting based on parameters entered in the software
- Pantograph based design for zero rotation eliminating tangled cables completely
- The high degree of tilt possible – up to 58 degrees
- Root face angles other than 90 degrees also possible
- True corners without loops
- Maximum utilization of plates as corner loops are not required
- Easy nesting of weld ready parts makes the working of the system as simple as the square cutting process
- Complete digital electronics with fully integrated Z axis
- Innovative laser based height control for precise root-face and dimensions
- Second laser to display the focal point
- Spring-loaded multi-direction breakaway torch holder
- Spring-loaded collision ring around pantograph and torch
- Power-Off recovery without homing
- Handles with easy multi-pass complex beveling
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
By proceeding you agree to our Negotiation Terms & Privacy Policy. Refund as per Refund Policy.
This is a Pro-Arc CNC Plasma 3D Bevel Cutting Machine
| Brand | Pro-Arc |
| Process | Gas Cutting,Plasma Cutting |
| Diameter Range | 50 mm to 2000 mm |
| Effective Cutting Length | Up to 24 m |
| Pipe Clamping | Manual,Pneumatic,Hydraulic |
| Idler Support | At equal intervals depending on length of pipes |
Automation Grade : Fully-automatic
Power : 10 KW
Voltage : 415 V
Material : Mild Steel
Machine Capacity : 0.5 – 25 mm
Phase : 3 Phase
Frequency : 50 Hz
Table Size : 3200 x 1800 mm
Cutting Thickness : 20 mm
Power Source : Electric
The Pro-Arc CNC Plasma 3D Bevel Cutting Machine is a specialized computer numerical control (CNC) machine designed for precise and efficient cutting of various materials, particularly metals, using a plasma cutting process. This machine is specifically equipped with 3D bevel cutting capabilities, allowing it to create beveled edges and angled cuts on the workpiece.
Here are some key features and considerations regarding the Pro-Arc CNC Plasma 3D Bevel Cutting Machine:
- CNC Control System: The machine is controlled by a CNC system, which uses computer programming and software to guide the cutting process. This enables precise control over the cutting parameters, such as speed, acceleration, and direction, resulting in accurate and repeatable cuts.
- Plasma Cutting Technology: The machine utilizes plasma cutting, which involves the use of a high-temperature plasma arc to melt and cut through
Features:
- Automatic bevel cutting of weld ready parts with K, Y, V bevel cuts
- Easy programming of bevel cutting based on parameters entered in the software
- Pantograph based design for zero rotation eliminating tangled cables completely
- The high degree of tilt possible – up to 58 degrees
- Root face angles other than 90 degrees also possible
- True corners without loops
- Maximum utilization of plates as corner loops are not required
- Easy nesting of weld ready parts makes the working of the system as simple as the square cutting process
- Complete digital electronics with fully integrated Z axis
- Innovative laser based height control for precise root-face and dimensions
- Second laser to display the focal point
- Spring-loaded multi-direction breakaway torch holder
- Spring-loaded collision ring around pantograph and torch
- Power-Off recovery without homing
- Handles with easy multi-pass complex beveling
It is in a good working condition.
No pending loan against the machine
It has been Recently serviced.
