Twin Turret Twin Spindle TURN-MILL CNC Machine
₹25 Lakh
This is a Twin Turret Twin N Spindle TURN-MILL CNC Machine
It is in a Excellent working condition.
No pending loan against the machine.
It has been Recently serviced.
By proceeding you agree to our Negotiation Terms & Privacy Policy. Refund as per Refund Policy.
This is a Twin Turret TwinN Spindle TURN-MILL CNC Machine with BarFeeder,
Nakamura WT250 (Machine Configuration)
Parts Includes In Machine :-
Total Axis – 7 / X1, X2, Z1, Z2, C1, C2, B1 ;
Total Turning Spindles – 2 / 250mm (9.84 Inch) & 165mm (6.5 Inch),
Total Turrets – 2 / 12 Station (Upper & Lower Turret),
Bar Feeder – MultiFeed, Short Magazine CNC Barfeed,
Part Catcher (Carrying Workpieces Outside Machine),
Tool Setter,
Chip Conveyor (Installed at the Side of the Machine),
Stabilizer – SERVO VOLTAGE STABILIZER 40 KVA,
Air Dryer – TRIDENT COLDSPELL TID 35 CFM,
General :-
System (Control) – FANUC 18i-T ,
Servo System – AC Drives & AC Servo Motors,
Capacity & Axis Travel :-
Max. Turning Diameter – 250mm (9.84 Inch),
Max. Turning Length – 435mm (17.13 Inch),
C1 – Axis – 360 Degree,
C2 – Axis – 360 Degree,
Main Spindle (Left Side) :-
Spindle Speed – 4500rpm,
Spindle Nose – A2-5,
Hole Through Spindle – 63mm (2.48 Inch),
Drive Motor – 26/22 kW,
Sub-Spindle (Right Side) :-
Spindle Speed – 4500rpm,
Spindle Nose – A2-5,
Hole Through Spindle – 63mm (2.48 Inch),
Drive Motor – 7.5/5.5 kw,
B-Axis Motor – 2.1 kW,
C-Axis (C1 & C2 Axis) :-
Index Accuracy – 40Sec,
C-Axis Travel – 360 Degree (C1 & C2),
C-Axis Drive Motor (Cf) – 0.2 kW,
Rotary Tool Spindle (Upper / Lower Turret) :-
Spindle Speed – 30 to 3600RPM,
Rotary Tool Drive Motor – 3.7/2.2 kW,
Number of Tool Mounting Positions – 12,
Turret (Upper / Lower) :-
Number of Stations – 12,
Tool Size – 25mm (1 Inch),
I.D. Turning Tool Mounting Bore Dia. – 32mm (1.26 Inch),
Turret Index Motor – Servo Motor,
Cutting Feedrate :-
Rapid Traverse X1/X2 – 12000 mm/Min. (472.44 Inch/Min.),
Rapid Traverse Z1/Z2 – 24000 mm/Min. (944.88 Inch/Min.),
Cutting Feed X1/X2 – 0.0001 to 500 mm/Min. (0.000004 to 19.70 Inch/Min.),
Cutting Feed Z1/Z2 – 0.0001 to 500 mm/Min. (0.000004 to 19.70 Inch/Min.),
Jog Feed X/Z – 0 to 1260 mm/Min. (0 to 49.61 Inch/Min.) / 16Steps ,
Part Catcher A type (Carrying Workpieces Outside Machine) :-
Type – Swing Bucket Type,
Capacity – 65 mm (2.56 Inch),
Length – 100/200 mm (3.94/7.87 Inch),
Weight – 1.5/33.11 kg,
It is in a good working condition.
No pending loan against the machine.
It has been Recently serviced.
